 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| The
Essence of Total Relaxation 5 Models to Choose From Step By Step Instructions for Assembling Spa-N-A-Box |
|
Step
One |
Parts
1 power pack 2 filters 1 inlet nozzle 8 wall panels 1 air loop 1 vinyl cover 8 corner pieces |
|
1 grey spa cover 3 floor pads (6 ft) |
Step One Corner Pieces slide into groves on panels. Interlock each panel to each corner piece. The textured color should be facing outward. |
  |
Step Two Insert the padded foam floor pieces. Place the liner in spa structure. Pull black vinyl over the top of spa structure. Snap each corner of vinyl onto corner piece of spa structure. |
  |
Step Three Attach each fitting on power pack to each fitting on liner. Make sure o-ring and washer are in place. Hand tighten only. Wrap black vinyl cover piece arround fittings between power pack and spa structure |
  |
| Step Four Air loop fits onto top of powerpack |
|
| Step Five Filters fit onto PVC inlets on liner. Cover top with cap pieces. Inlet Jet screws into dedicated hole next to filters |
  |
| Step 6 Fill spa to approximately two inches above filter caps. |
 |
| Step 7 Turn temperature Dial to max. Position (red) until spa has reached desired temperature. Max. temp=104 degree. Push Black Button on power pack to activate blower. |
  |
| Step 8 |
|
 |
 |
| Now Have Fun and Relaxation | |
Web
Site Designed and Marketed by  to the customer's specifications and desires Colorado Springs, Colorado Copyright © 2002, Columbine-Rosebud Enterprises, All Rights Reserved |
|